Dotclear

Vous n'êtes pas identifié(e).

Annonce

13 février 2024 Sortie de Dotclear 2.29

#1 2019-09-08 21:35:03

clearingthedots
Membre
Inscription : 2010-06-09

Problem with dcCKEDitor

Hi everyone,

I have been having a problem with dcCKEditor for quite a while forcing me to use dcLegacyEditor. It would be nice to figure out the problem so I can use the dcCKEditor.

Problem: when I choose dcCKEditor as my preferred editor, the 'new entry' page goes blank on the Excerpt and Content fields. I can't post an entry at all. When I reset it back to the legacy editor then the 'new entry page' works fine.

Any ideas what the problem might be? My version of dotclear is 2.15.1

Note:
I only have this problem on a blog I have been running for many years - upgraded to 2.15.1.

I have a test blog with no entries and dcCKEditor works there. BUT when I do a full blog import to this test blog then dcCKEditor STOPS working. There must be some setting in my blog that is causing the problem...

Any help would be appreciated.

Hors ligne

#2 2019-09-09 05:40:07

Philippe
Stagiaire
Lieu : Toulon
Inscription : 2004-06-13
Site Web

Re : Problem with dcCKEDitor

Hello.

First of all, check that the admin URL in dotclear/inc/config.php is exactly the same as in backoffice's blog parameters. The dcCKEditor plugin is quite touchy on this point.

Hors ligne

#3 2019-09-09 20:38:52

clearingthedots
Membre
Inscription : 2010-06-09

Re : Problem with dcCKEDitor

Thanks a bunch Philippe! I changed admin address to https and added www. to the address in config.php. Now it works.

Hors ligne

#4 2020-02-19 14:23:47

manifesto
Membre
Inscription : 2008-07-24

Re : Problem with dcCKEDitor

Just after upgrading to last version (2.15.3) I got similar issue.
I check this post and find out that DC_ADMIN_URL did not have the good domain, fix and everything work again.
Thanks a lot for the job job mate.

Hors ligne

#5 2020-02-19 16:17:59

Tin
Membre
Lieu : Suisse
Inscription : 2016-04-08
Site Web

Re : Problem with dcCKEDitor

Hi

Yes I see the DC_ADMIN_URL parameter in config.php. But where you you see this option in the blog setup in the admin pages?

Thanks.


Salutations / best regards
Tin

Hors ligne

#6 2020-02-19 17:17:10

Philippe
Stagiaire
Lieu : Toulon
Inscription : 2004-06-13
Site Web

Re : Problem with dcCKEDitor

It has nothing to do with the blog setup

The DC_ADMIN_URL must be strictly the same as the actual admin url of your installation

So if your admin is http://domain.tld/dotclear/admin/

DC_ADMIN_URL is http://domain.tld/dotclear/admin/

Hors ligne

#7 2020-02-19 18:07:39

Tin
Membre
Lieu : Suisse
Inscription : 2016-04-08
Site Web

Re : Problem with dcCKEDitor

Ok, but then I don't understand your input:

   First of all, check that the admin URL in dotclear/inc/config.php is exactly the same as in backoffice's blog parameters.

What you you mean with "backoffice's blog parameters"?


Salutations / best regards
Tin

Hors ligne

#8 2020-02-20 06:31:54

nikrou
Membre
Inscription : 2007-10-02
Site Web

Re : Problem with dcCKEDitor

Tin a écrit :

Ok, but then I don't understand your input:

   First of all, check that the admin URL in dotclear/inc/config.php is exactly the same as in backoffice's blog parameters.

What you you mean with "backoffice's blog parameters"?

In the admin web interface : https://domain.ltd/dotclear/admin/blog_ … anced-pref


Je préfère être atteint de parkinson plutôt qu'alzheimer : je prefère renverser un peu de ma bière plutôt qu'oublier de la boire !

Présentez vos photos simplement avec Phyxo !

Hors ligne

#9 2020-02-20 06:39:29

Philippe
Stagiaire
Lieu : Toulon
Inscription : 2004-06-13
Site Web

Re : Problem with dcCKEDitor

Tin a écrit :

What you you mean with "backoffice's blog parameters"?

I meant back office url, but did not express myself clearly enough ;)

Hors ligne

#10 2020-02-20 23:07:24

Tin
Membre
Lieu : Suisse
Inscription : 2016-04-08
Site Web

Re : Problem with dcCKEDitor

nikrou a écrit :

No, I think you are wrong. In the web admin interface you have "https://domain.tld/dotclear/index.php/?" and under DC_ADMIN_URL in config.php you have "https://domain.tld/dotclear/admin/".

Dernière modification par Tin (2020-02-21 00:45:49)


Salutations / best regards
Tin

Hors ligne

#11 2021-12-27 09:12:43

mangetout
Membre
Inscription : 2021-02-08

Re : Problem with dcCKEDitor

Thanks for this - I had the same problem, and editing the admin URL in config.php resolved it

Hors ligne

Vous n'êtes pas identifié(e).

Pied de page des forums

Sites map